Page 1 of 10 123 ... LastLast
Results 1 to 10 of 96

Thread: JimmyGT's 1995 Mustang GT

  1. 03-09-2017, 08:56 PM #1
    JimmyGT
    JimmyGT is offline
    Registered User CMC 281 JimmyGT's Avatar
    Join Date
    May 2014
    Location
    Bartlett,IL
    Posts
    134

    Default JimmyGT's 1995 Mustang GT

    I purchased the car in 2014 with 70,000 miles. The guy before me built the top end with twisted wedge 170's, stage1 trick flow cam, trick flow street heat intake manifold,24# injectors,larger fuel rails, 70mm throttle body, c&L cold air, tuned by Bob Kurgan. I was told it put down 370rwhp 350tq BUT I've never seen the sheets and I cannot prove that!









    Shortly after purchasing the car I had 3:73's put in also had a fresh clutch installed along with some lowering springs to get rid of the 4x4 off-road look with the factory suspension.

    About a year after owning it I blew a head gasket somehow.....so while the car sat I contemplated how I wanted to go about taking care of the head gaskets and well after a lot of research and sleepless nights and more research and cant forget about convincing the wife! I finally pulled the trigger in January 2016 and put in a call to woody at ford stroker...


    Sent from my iPhone using Tapatalk
    Last edited by JimmyGT; 05-06-2017 at 04:55 PM.
    1995 White GT 5 speed
    2011 Silver SHO Taurus
    Reply With Quote Reply With Quote
  2. 03-09-2017, 09:01 PM #2
    JimmyGT
    JimmyGT is offline
    Registered User CMC 281 JimmyGT's Avatar
    Join Date
    May 2014
    Location
    Bartlett,IL
    Posts
    134

    Default

    Ford strokers* I had him build me a 363 stroker, wiseco pistons, scat crank and h beam rods, arp hardware





    Sent from my iPhone using Tapatalk
    1995 White GT 5 speed
    2011 Silver SHO Taurus
    Reply With Quote Reply With Quote
  3. 03-09-2017, 09:07 PM #3
    JimmyGT
    JimmyGT is offline
    Registered User CMC 281 JimmyGT's Avatar
    Join Date
    May 2014
    Location
    Bartlett,IL
    Posts
    134

    Default

    Then came some parts






    I had the lower manifold sent off to Matt Moss to be port matched.



    Sent from my iPhone using Tapatalk
    1995 White GT 5 speed
    2011 Silver SHO Taurus
    Reply With Quote Reply With Quote
  4. 03-09-2017, 09:12 PM #4
    JimmyGT
    JimmyGT is offline
    Registered User CMC 281 JimmyGT's Avatar
    Join Date
    May 2014
    Location
    Bartlett,IL
    Posts
    134

    Default

    Since we got some really nice weather a few weeks back my buddy helped me pull the motor and trans...










    Sent from my iPhone using Tapatalk
    1995 White GT 5 speed
    2011 Silver SHO Taurus
    Reply With Quote Reply With Quote
  5. 03-09-2017, 09:20 PM #5
    JimmyGT
    JimmyGT is offline
    Registered User CMC 281 JimmyGT's Avatar
    Join Date
    May 2014
    Location
    Bartlett,IL
    Posts
    134

    Default

    So after talking to Mike Post I went with the Holley HP EFI kit and 83# injectors



    Also decided to utilize the digital dash they offer. I don't have the 7.5" screen I do have the housing from Florida 5.0 installed in the instrument bezel whatever








    Sent from my iPhone using Tapatalk
    1995 White GT 5 speed
    2011 Silver SHO Taurus
    Reply With Quote Reply With Quote
  6. 03-09-2017, 09:25 PM #6
    JimmyGT
    JimmyGT is offline
    Registered User CMC 281 JimmyGT's Avatar
    Join Date
    May 2014
    Location
    Bartlett,IL
    Posts
    134

    Default

    I ditched the wimpy stock radiator for this bad boy and new 16" fan.


    Stock radiator


    New champion radiators 4 core



    Also had to upgrade the coolant tank




    Sent from my iPhone using Tapatalk
    1995 White GT 5 speed
    2011 Silver SHO Taurus
    Reply With Quote Reply With Quote
  7. 03-09-2017, 09:31 PM #7
    JimmyGT
    JimmyGT is offline
    Registered User CMC 281 JimmyGT's Avatar
    Join Date
    May 2014
    Location
    Bartlett,IL
    Posts
    134

    Default

    The car came with BBK shortys, 2.5" BBK Off-road pipe, mufflers and flowmaster tail pipes




    I upped the size of the exhaust. I went with mac 1 3/4" to 3" long tubes, 3" mac h pipe and 3" pro dumps





    Sent from my iPhone using Tapatalk
    1995 White GT 5 speed
    2011 Silver SHO Taurus
    Reply With Quote Reply With Quote
  8. 03-09-2017, 09:35 PM #8
    JimmyGT
    JimmyGT is offline
    Registered User CMC 281 JimmyGT's Avatar
    Join Date
    May 2014
    Location
    Bartlett,IL
    Posts
    134

    Default

    I had all these extra parts laying around so I cleaned some of them up and tried something out





    Work in progress!





    Sent from my iPhone using Tapatalk
    1995 White GT 5 speed
    2011 Silver SHO Taurus
    Reply With Quote Reply With Quote
  9. 03-09-2017, 09:39 PM #9
    JimmyGT
    JimmyGT is offline
    Registered User CMC 281 JimmyGT's Avatar
    Join Date
    May 2014
    Location
    Bartlett,IL
    Posts
    134

    Default

    I plan on making another end table for the other end of my basement couch out of this baby!



    First end table





    Sent from my iPhone using Tapatalk
    1995 White GT 5 speed
    2011 Silver SHO Taurus
    Reply With Quote Reply With Quote
  10. 03-09-2017, 09:44 PM #10
    JimmyGT
    JimmyGT is offline
    Registered User CMC 281 JimmyGT's Avatar
    Join Date
    May 2014
    Location
    Bartlett,IL
    Posts
    134

    Default

    I ordered a bolt in cage from auto power industries. Yes I know bolt in cage




    Also ordered up my hood from VFN in Addison.


    3.5" cobra R
    1995 White GT 5 speed
    2011 Silver SHO Taurus
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules