Page 1 of 142 1231151101 ... LastLast
Results 1 to 10 of 1411

Thread: fkurls1's new project: 1993 notch

  1. #1
    DEF LEPPARD SUCKS! CMC Boss460 fkur4v's Avatar
    Join Date
    Aug 2008
    Location
    Woodstock
    Posts
    5,327

    Default fkurls1's new project: 1993 notch






    So I made a deal with the devil on this one...Had a guy a few months back look at my 95, two weeks ago he calls me and tells me he picked up this notch. Long story short he was willing to do just about anything to get my gts, like give me this notch and a bunch of cash. Too good to pass up and I've always wanted a notch so why the hell not? I NEEDED another project.

    As she sits now: looks like a old build to me, add a sprinkle of ghetto cruiser, preheat just a lil midwestern rust, and bake in a average body shop paint job

    the good:
    dss 306 with supposed forged internals (tear down and re-gasket soon for inspection)
    e-cam
    holley systemax, 75mm tb
    edlebrock performer rpm heads
    old school v-1 s trim, msd 6 btw, fmu, 36lb inj
    lakewood scatter sheild
    tremec 3550
    3:73 gears
    orig YN silver car
    m/t drag radial

    the bad:
    average paint job
    needs both bumpers
    typical mid western rust (light surface, solid)
    old dirty capet, and seats
    engine bay masked off and rattle canned black
    cheap 50 resto 5 lug conversion
    stock fox brakes

    the ugly:
    gangster tints
    black powder coated 17x8 bullit rims
    smoked headlights, tail lights

    Its gonna need allot of work, and I plan on eventually going through the whole car. However its the car I always wanted and it has tons of potential. Lucky me I have pockets filled with money to start "investing"

    the headlights and tail lights are already sold (thanks super kaz)
    coming soon to the cmc classifieds:
    bullet wheels
    stock hood
    seats
    cheap 5 lug kit
    tremec 3550
    36 lb injestors, maf
    autometer silver gauges
    equal length shorties
    off road h

    stay tuned I plan on updating this as my build goes!



    2 years later this is the final mod list:

    ENGINE: boss block, 308cid diamond boost Pistons, total seal rings, forged crank, and h beam rods, AFR 185 heads, morel bar lifters, Ed curtis cam, 7/16 1.6 rockers
    Systemax intake, accufab 70mm throttle body, canton 7qt pan, TFS valve covers, remote mounted breather system to catch can in rear of the car

    POWER ADDER: vortech YSI, renegade bracket, custom 3" aluminum I/C piping, procharger big red BOV, 3 core procharger intercooler.

    EXHAUST: 1-3/4 Kooks stainless headers, 3" x pipe, Bassanni cat back with 3.5" tips

    FUEL SYSTEM: BBRC aluminum tank. Magnafuel external pump, all AN lines(-10 feed, -8 return) Magnafuel regulator and 83lb/hr injectors

    ENGINE MANAGMENT: Big Stuff 3

    DRIVETRAIN: T56 Magnum, McLeod RXT twin disc, Stifflers cross member, custom
    Driveshaft by VRN with a 1350 yoke, 8.8 with 9" ends. Strange 31 spline axles and 3" studs, tru trac diff, motive 3.73 gear, CHE axle brace

    SUSPENSION: MM tubular k, a arms, subframes, LCA's, and front coil over kit, hyper tech springs front and H&R rears, Koni yellow shocks/struts, TRZ adjustable rear UCA's

    BRAKES/WHEELS: 94-04 cobra front and rear, 93 cobra master, all stainless lines, BBK RK wheels, 18x8.5/18x10 rear with a 305/35/18 et street

    EXTERIOR: minus the 4" hood, stock

    INTERIOR: converted to black. All cobalt gauges.











    Last edited by fkur4v; 07-19-2016 at 01:30 AM.

  2. #2
    DEF LEPPARD SUCKS! CMC Boss460 fkur4v's Avatar
    Join Date
    Aug 2008
    Location
    Woodstock
    Posts
    5,327

    Default

    First wave of GOOD parts:
    vortech mini race valve-used
    13" 94-04 cobra calipers
    94-95 spindles
    pro 50 shifter
    msd dizzy, plugs wires
    and hopefully tonight a custom vortech front mount i/c kit

  3. #3
    Pre Owned Manager of Anything you want CMC SuperCobraJet SBTerminator's Avatar
    Join Date
    Feb 2010
    Location
    Northlake/ Skokie IL
    Posts
    2,566

    Default

    Nice little project !!

  4. #4
    Registered User CMC 281
    Join Date
    May 2010
    Location
    Manteno
    Posts
    131

    Default

    bad ass good luck with your progress
    01bullitt
    89 lx rust bucket

  5. #5
    DEF LEPPARD SUCKS! CMC Boss460 fkur4v's Avatar
    Join Date
    Aug 2008
    Location
    Woodstock
    Posts
    5,327

    Default

    merry xmas to me! 350 shipped!

  6. #6
    DEF LEPPARD SUCKS! CMC Boss460 fkur4v's Avatar
    Join Date
    Aug 2008
    Location
    Woodstock
    Posts
    5,327

    Default




    now to call vortech and get a price on a straight impeller housing

  7. #7
    Senior Member CMC SuperCobraJet
    Join Date
    Mar 2005
    Location
    Mount Prospect, IL
    Posts
    2,703

    Default

    Looks good Nate. If u ever need anything let me know. Also if your gonna sell the black cobra rs let me know they might look nice on the buick
    Joel

  8. #8
    DEF LEPPARD SUCKS! CMC Boss460 fkur4v's Avatar
    Join Date
    Aug 2008
    Location
    Woodstock
    Posts
    5,327

    Default

    there for sale Joel! i need a traight discharge impeller housing if you have one!

  9. #9
    Senior Member CMC SuperCobraJet
    Join Date
    Mar 2005
    Location
    Mount Prospect, IL
    Posts
    2,703

    Default

    Quote Originally Posted by fkurls1 View Post
    there for sale Joel! i need a traight discharge impeller housing if you have one!
    You need to have vortech install the discharge because they need to shim the impeller to make it fit right. If your going to send it in for a new volute then I would have them install the Si trim impeller.
    Joel

  10. #10
    ^ Amateur Using Nitrous Oxide CMC Event Coordinator MGLT's Avatar
    Join Date
    Nov 2008
    Location
    Southside
    Posts
    16,893

    Default

    Sick! Foxbodies ftw! After a smaller pulley, bigger injectors and a supporting fuel system that will be one nasty street car.
    -Matt

    2012 Mustang Boss 302 - Garage Queen Edition
    1990 Mustang 5.0 LX - Round the block race car
    1988 Mustang 5.0 GT

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •